-
ASTM A500 carbon steel structural pipe
ASTM A500 steel is cold-formed welded and seamless carbon steel structural tubing for welded, riveted, or bolted bridges and building structures and general structural pur...Read more -
What is S355J2H steel?
S355J2H is a hollow section (H) structural steel (S) with a minimum yield strength of 355 Mpa for wall thicknesses ≤16 mm and a minimum impact energy of 27 J at -20℃(J2). ...Read more -
JIS G 3454 Carbon Steel Pipes for Pressure Service
JIS G 3454 steel tubes are carbon steel tubes primarily suitable for use in non-high-pressure environments with outside diameters ranging from 10.5 mm to 660.4 mm and with...Read more -
JIS G 3456 Carbon Steel Pipes for High Temperature Service
JIS G 3456 steel Pipes are carbon steel tubes are primarily suitable for use in service environments with outside diameters between 10.5 mm and 660.4 mm at temperatures in...Read more -
What is JIS G 3452?
JIS G 3452 Steel Pipe is the Japanese standard for carbon steel pipe applied with relatively low working pressure for transportation of steam, water, oil, gas, air, etc. ...Read more -
BS EN 10210 VS 10219: Comprehensive Comparison
BS EN 10210 and BS EN 10219 are both structural hollow sections made of unalloyed and fine-grained steel. This paper will compare the differences between the two ...Read more -
BS EN 10219 – Cold formed welded steel structural hollow sections
BS EN 10219 steel is cold-formed structural hollow steels made from non-alloy and fine-grained steels for structural applications without subsequent heat treatment. ...Read more -
BS EN 10210 – Hot finished steel structural hollow sections
BS EN 10210 steel tubes are hot-finished hollow sections of unalloyed and fine-grain steels for a wide range of architectural and mechanical structural applications. Conta...Read more -
ASTM A210 Steel Boiler and Superheater Tube
ASTM A210 steel tube is a medium carbon seamless steel tube used as boiler and superheater tubes for high temperature and high-pressure environments, such as in power stat...Read more -
Difference Between A671 and A672 EFW Pipes
ASTM A671 and A672 are both standards for steel tubing made from pressure vessel-quality plates by electric fusion welding（EFW） techniques with the addition of filler me...Read more -
What is the specification of ASTM A672?
ASTM A672 is a steel pipe made from a pressure vessel quality plate, Electric-Fusion-Welded (EFW) for high-pressure service at moderate temperatures. ...Read more -
AS/NZS 1163: Guide to Circular Hollow Sections (CHS)
AS/NZS 1163 specifies cold-formed, resistance-welded, structural steel hollow pipe sections for general structural and engineering applications without subsequent heat tre...Read more
Leading Steel Pipes Manufacturer & Supplier In China |
- Tel: 0086 13463768992
- | Email: sales@botopsteel.com
